This pump is the highest PSI pump available on the market. These will help achieve the smallest micron droplet size possible. Internal bypass design results in superior flow at higher pressure than pumps using an external cut off switch.

• Pressures up to 300 PSI (20 bar)
• Self priming up to 8 vertical feet (2.4m)
• Chemical resistant materials
• Can run dry without damage
• Designed for heavy duty methanol injection systems
• Built in reverse check valve

This pump delivers 1.0 GPM open flow, EPDM /Nylon valves, Santoprene diaphragm, and adjustable peek pressure from 150 to 300psi. (Factory set to 200psi) Female 3/8npt ports, with a poly housing while having a low 10amp current draw. These water-methanol pumps are extremely durable, and will most likely outlast your car.

While this pump is chemically compatible for use with 100% methanol and/or ethanol, we do not recommend running flammable liquids.

DO NOT PUMP FLAMMABLE LIQUIDS
DO NOT PUMP MORE THAN 50/50 MIX OF ALCOHOL AND WATER MORE THAN 50% ALCOHOL IS A FLAMMABLE LIQUID

Specifications: Motor Type: 12 VDC permanent magnet, totally enclosed, non-ventilated, Leads: 14 AWG, 12” long, Duty Cycle: See Heat Rise graph, Temperature Limits: Motor is equipped with thermal protection. For user safety, optimal performance, and maximum motor life, the motor surface temperature should not exceed 150°F (66°C).(See Heat Rise graph).

Pump: Type: 3 chamber positive displacement diaphragm pump, self priming, capable of being run dry Certifications: CE Approval, ISO 9001:2008, Liquid Temperature: 140°F (60°C) Max, Priming Capabilities: 8 feet (2.4 m), Max Pressure: 250 PSI (17.2 bar), Inlet/Outlet Ports: 3/8” FNPT, Weight: 6 lbs (2.7 kg).

Materials of Construction: Housings: Polypropylene, Valves: EPDM, Diaphragm: Santoprene, Fasteners: Stainless Steel, Motor Shell: Coated Steel.